Table of Contents
Advertisement
(7)
(5)
(2
)
8. Insert the nozzle cleaning pin 1.5 (7) into the screw hole
(2)
9. Install the screws (5) to the nozzle (2).
(2)
(5)
10. Discharge the glue and check that glue come out from all
BM-2000
in the nozzle (2) to remove any blockages from the glue
path in the nozzle (2).
* Install the two screws.
of the discharge holes in the nozzle (2). (Refer to "4.2" for
details on the discharging method.)
* If glue is not coming out from all of the discharge holes
in the nozzle (2), clean the discharge holes of the
nozzle (2) once more.
10 CLEANING
67
Advertisement
Table of Contents
