Table of Contents
Advertisement
Charge with cleaner at the following times.
⚫
When replacing the nozzle
⚫
If not using the machine for three days or more
Use only the cleaner specified by Brother.
1. Refer to "9.2 Glue cartridge replacing method" for
2. Press the
3. Press the NOZZLE switch (1) to raise the nozzle (3)
4. Place a dish such as a paper cup (4) for receiving a
5.
6. Depress the treadle while pressing the GLUE
(1)
7. Once discharging of the cleaner is completed, use a
NOTE:
(2)
Follow all applicable regulations when disposing of the
cleaner.
(3)
(4)
BM-2000
details on replacing the glue with cleaner.
key to display the test screen.
to the highest position.
cleaner under the nozzle.
Press the
key to switch to automatic
discharge mode.
(Refer to "4.2.2 Automatic discharge mode" for
details on automatic discharge mode.).
ON/OFF switch (2) to start the discharge of glue
from the nozzle (3). Cleaner will continue to be
discharged for the length of time specified even
after the treadle is released.
cloth or similar to wipe off any cleaner which is
adhering to the nozzle (3).
10 CLEANING
77
Advertisement
Table of Contents
