11.1.2 Adjusting the nozzle position (feed direction)
1.
Display the memory switch setting screen. Refer to "3.5" for details on the display method.
2.
Change the setting value for memory switch No. 411 so that the center of the nozzle screw is directly above the center
of the nozzle lower roller shaft. The larger the value, the further forward the nozzle will move.
No.
Name
411
Nozzle lever application
position correction
Details
Correction amount for application
position (position a)
BM-2000
11 PART REPLACEMENT METHOD
Nozzle screw
Nozzle lower roller shaft
Setting
Step
range
4
-120~120
Initial
value
0
81