Order Data - GEM 4242 Operating Instructions Manual

6 Order data

6 Order data
The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Note: A valve specific mounting kit is required for assembly. For designing the mounting kit, the valve type, nominal size, control
function and actuator size must be stated.
Information for AS-Interface 5 versions: If there are customer or system restrictions that prohibit the use of a Bluetooth wireless
interface, it is recommended to use an order variant with a deactivated BLE interface. For versions without a deactivated BLE in-
terface, the option also exists to deactivate the interface independently later.
The versions with fieldbus ASi-5 are (temporarily) only available in the following basic configuration:
Size 1:
Fieldbus AS-Interface 5, 96 slaves, BLE (code A5),
Housing material: Stainless steel base (code 07),
Single acting (code 01),
M12 plug, 5-pin (code 01),
Pneumatic 6 mm angled connection (code 04),
Without manual override (code 01).
23 Nl/min flow rate (code 02),
30 mm travel sensor length (code 030),
Without special function (code -) or with ATEX special function (code X)
Size 2:
Fieldbus AS-Interface 5, 96 slaves, BLE (code A5),
Housing material: Stainless steel base (code 07),
Single acting (code 01),
M12 plug, 5-pin, stainless steel (code S1),
Pneumatic 6 mm angled connection (code 04),
No code option (code 00),
145 Nl/min flow rate,
30 mm travel sensor length (code 030) or 75 mm (code 075),
Without special function (code -) or with ATEX special function (code X)
GEMÜ 4242 8 / 51 www.gemu-group.com