GEM 4242 Operating Instructions Manual page 35

Port Index "Access
[Hex] Rights"
1 0x6532 RO
1 0x65C1 RO
1 0x6641 RW
1 0x6651 RW
1 0x6661 RW
www.gemu-group.com
Parameter "Length
Absolute travel sensor 2 byte
position CLOSED end
position
Control function 1 byte
Digital input 1 function 8 bit
(Defines the behaviour
of the input process
data bit 0)
Digital input 2 function 8 bit
(Defines the behaviour
of the input process
data bit 1)
Digital input 3 function 8 bit
(Defines the behaviour
of the input process
data bit 2)
"Data "Default set-
" type" ting"
uint:16 0
uint:8 -
uint:8 1
(Controlling
pneumatic
outputs)
uint:8 0
(Off)
uint:8 3
(Initializa-
tion)
35 / 51
15 Specific data – AS-Interface
"Adjustment "Description"
facility"
- 0.0 to Initialized travel
100.0% sensor position
CLOSED end position
0 undefined No control function re-
cognised
1 NC Normally closed con-
trol function detected
2 NO Normally open control
function detected
3 DA Double acting control
function detected
0 Off No function
1 Controlling Activates the pneu-
pneumatic matic output
outputs
2 - -
3 Initialization Starting initialization
4 Localization Activates the location
function
5 Safe/On If the signal is not act-
ive, the position
defined in the "Error-
Action" (0x004F) para-
meter is approached.
If the signal is active,
normal operation is
carried out in accord-
ance with external sig-
nals.
0 Off No function
1 Controlling Activates the pneu-
pneumatic matic output
outputs
2 - -
3 Initialization Starting initialization
4 Localization Activates the location
function
5 Safe/On If the signal is not act-
ive, the position
defined in the "Error-
Action" (0x004F) para-
meter is approached.
If the signal is active,
normal operation is
carried out in accord-
ance with external sig-
nals.
0 Off No function
1 Controlling Activates the pneu-
pneumatic matic output
outputs
2 - -
GEMÜ 4242