Order Data - GEM 4240 Operating Instructions Manual

6 Order data

The order data provide an overview of standard configurations.
Please check the availability before ordering. Other configurations available on request.
Note: A valve specific mounting kit is required for assembly. For designing the mounting kit, the valve type, nominal size, control
function and actuator size must be stated.
Order codes
1 Type
Combi switchbox
2 Fieldbus
Without
3 Accessory
Accessory
4 Housing material
PPS base, PC cover
5 Action
Single acting, with manual override
Double acting, with manual override
Single acting, without manual override
6 Electrical connection
M16 Skintop cable gland
7 Pneumatic connection
G1/8 connection thread
Air supply 6 mm angled connection,
exhaust air 6 mm angled connection
Order example
Ordering option
1 Type
2 Fieldbus
3 Accessory
4 Housing material
5 Action
6 Electrical connection
7 Pneumatic connection
8 Switch
9 Connection diagram
10 Travel length
www.gemu-group.com
Code 7 Pneumatic connection
4240 Air supply 6 mm T-connection,
exhaust air 6 mm angled connection
Code
G1/8 connection thread
000
(for IP67 or piped air outlet)
Code
8 Switch
Z
Change-over contact, microswitch, 24 V DC, 250 V AC
Crouzet, V4S, SPDT
Code
Proximity switch, 2-wire, NAMUR
01
P+F, HJ1.5-6.5-15-N-Y180094
Proximity switch, 3-wire, make contact, PNP, 10–30 V
Code
DC
01
Balluff, BES 516-371-SA 16
02
9 Connection diagram
E1
Microswitch
Code
Terminals, NAMUR
03
3-wire
Code
10 Travel length
01
Potentiometer, 75 mm length
04
Code
4240 Combi switchbox
000 Without
Z Accessory
01 PPS base, PC cover
01 Single acting, with manual override
03 M16 Skintop cable gland
04 Air supply 6 mm angled connection,
exhaust air 6 mm angled connection
M1 Change-over contact, microswitch, 24 V DC, 250 V AC
Crouzet, V4S, SPDT
M1 Microswitch
075 Potentiometer, 75 mm length
7 / 23
Description
6 Order data
Code
05
E1
Code
M1
N1
P1
Code
M1
N1
P1
Code
075
GEMÜ 4240