Adjustment Level For Color Matching; Enable And Disable Color Calibration; Lens Calibration History - Epson EB-L20002U Firmware Update

Details of Updated Projector Menus (Version 3.00)
If you have already made corrections using Point Correction, you may
not be able to change Interpolation if the amount of correction is too
large.
a

Adjustment Level for Color Matching

The All setting value is added to the Adjustment Level menu from Extended
> Multi-Projection > Screen Matching > Color Matching.
Previous Settings Menu (Version 2.10)
Sub menu
Color Matching Adjustment Level
New Settings Menu (Version 3.00)
Sub menu
Color Matching Adjustment Level
There are eight levels from All, white, through gray, and up to black. When
you select All, you can adjust the color for each color in Adjustment Level 2
to 8 at the same time. (Once the red, blue, and green values are at their
maximum or minimum position at any level, you cannot make any further
adjustments.) Select Adjustment Level 1 to 8 to adjust each level individually.

Enable and Disable Color Calibration

You can enable or disable color calibration in the Color Calibration setting.
You need to set the Color Calibration setting to On to execute the auto
adjustment function for color calibration.
Items or setting values
1, 2, 3, 4, 5, 6, 7, 8
Items or setting values
All, 1, 2, 3, 4, 5, 6, 7, 8

Lens Calibration History

Previous Settings Menu (Version 2.10)
Top menu Sub menu
Extended Color Calibration
New Settings Menu (Version 3.00)
Top menu Sub menu
Extended Color Calibration
The History menu is added to the Lens Calibration menu. You can use the
History menu to check the lens calibration history.
Previous Settings Menu (Version 2.10)
Top menu Sub menu
Extended Operation
Items or setting values
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
Items or setting values
Color Calibration On, Off
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
Items or setting values
Lens Calibration Start
13