Heat & Glo TRUE-36G-IFT Installation Manual page 61

2 2
BURNED AREA BURNED AREA
LOG PLACEMENT NOTCH LOG PLACEMENT NOTCH
2 2
LOG PLACEMENT SLOTS LOG PLACEMENT SLOTS
Figure 4
Log #2 SRV2280-742 (TRUE-36), SRV2281-742 (TRUE-42): Locate log placement notch on the bottom of Log #2. See
Figure 4. Mate notch on the bottom of Log #2 with the center and right grate tines. Slide log toward rear of appliance until
right end contacts the side grate tine. See Figure 5. The left side of Log #2 will be about 1 inch from the back of the center
grate log placement tab when properly placed. See Figure 1.
NOTCH NOTCH
1 1
TOP OF BURNED TOP OF BURNED
AREA NEAR LOG #1 AREA NEAR LOG #1
NOTCH FOR LOG #4 NOTCH FOR LOG #4
LOG RESTING IN NOTCH LOG RESTING IN NOTCH
Figure 6
Log #3 SRV2281-743 (TRUE-36, TRUE-42): Locate log placement notches for Log #3 on Log #1 and Log #2. See Figure
5. Place Log #3 onto notches so that the bottom of the log rests in the notch on log #2 and the top rests in the notch on Log
#1. See Figure 6.
Log #4 SRV2280-744 (TRUE-36), SRV2281-744 (TRUE-42): See Figure 7. Place Log #4 between the left and center grate
tines. Notches on Log #4 will rest on tines. Log #4 should be positioned as far forward as possible. See Figure 8. Log #4
rests in notch on Log #2, shown in Figure 6.
Heat & Glo • TRUE-36-IFT, TRUE-42-IFT, TRUE-50-IFT Installation Manual • 2461-980 Rev. Y • 6/23
3 3
3 3
2 2
1 1
LEFT SIDE TOWARD REAR
Figure 5
LEFT LEFT
HAND HAND
NOTCH NOTCH
Figure 7
LOG CONTACTS LOG CONTACTS
SIDE GRATE TINE SIDE GRATE TINE
NOTCH FOR NOTCH FOR
LOG #3 LOG #3
2 2
5 5
4 4
RIGHT RIGHT
HAND HAND
NOTCH NOTCH
61