Table of Contents
Advertisement
•
•
•
Removals and Replacements
1 008 Front Cover
Removal
• Remove left cover
(1 005)
.
• Remove right cover
(1006).
• There are three screws on each side of the front
cover.
Remove
the lower four screws first.
• Brace the cover from the front while removing the two top
screws,
to prevent cross-threading and scoring .
Replacement
• Position the cover against the six holes on the front of the main
chassis with the logo at the upper left
corner.
• lnsert and finger-tighten the three screws on each side of the
front
cover.
The screws are inserted from the inside of the main
chassis.
• Tighten the screws to secure the cover against the main chassis
.
• lnstall right cover
(1
006).
• lnstall left cover
(1 005)
.
SECTION
3. Removai/Replacement Procedu res
45
Advertisement
Table of Contents
