Other Useful Functions; Audio Scope; Recording Function; Clock Setting Function That Uses An Ntp Server - Kenwood TS-890S In-Depth Manual

Other Useful Functions

Audio Scope

In the audio scope, the received and transmitted audio signals are displayed in the frequency spectrum and oscilloscope
waveform. The effects of applying the various equalizers and the effects of using the speech processors can be
observed. The audio scope can be used with the minimized bandscope at the same time.

Recording Function

The constant recording function is convenient such as when you missed hearing the callsign or when you are not
confident in a callback. Pressing and holding the [●(Red)] key saves the latest communication for up to 30 seconds into
an audio file, and you can listen to it again later.
Past
Fig. 69 Recording with a Long Press of the [●(Red)] Key (Constant Recording)
The recording function can also be used as a general-use recorder. For recording and playing back by a press of the
[●(Red)] key and [■] key, the internal memory of the main unit or a USB flash drive can be used. With the internal
memory of the main unit, a maximum of 9 hours* of recording is possible in one file, and with a USB flash drive, a
maximum of 18 hours of the long -time recording is possible in one file.
*Because the internal memory is used in common for other functions, the available recording time varies depending on
the free space at the time.

Clock Setting Function that uses an NTP Server

Connecting the TS-890S to a network enables the clock setting using an NTP server. If an NTP server is specified once,
the clock can be adjusted by a single touch. Enabling the automatic time correction function automatically corrects the
clock when the power is on and approximately every 24 hours after the power is on.
In addition, the clock setting by using an NTP server is also available when the ARCP-890 is connected through a LAN.
Press of [●(Red)] key
Recorded Voice
Approximately 30 s
Elapse
Present Time
Software 09
Time
61