Table of Contents
Advertisement
Message
"Scanner is not available.
Check the scanner
connection status."
Messages Displayed When You Use the Scanner Function
Cause
Network communication is
not available because the
machine's IP address could
not be obtained from the
host name. If only "IPv6" is
set to [Active], the IPv6
address might not be
obtained.
Solution
• Check whether the machine's host
name is specified in the Network
Connection Tool. For the WIA
driver, check the [Network
Connection] tab in the properties.
• Use Web Image Monitor to set
"LLMNR" of "IPv6" to [Active].
193
Advertisement
Table of Contents
