Switching Power - Subaru Crosstrek 2016 Owner's Manual

issue although no malfunction actually
occurs, or not to issue a warning when
any malfunction occurs.
On the instrument panel
On the floor
Inside the glove box
Inside the door trim pocket
On the rear seat
On the rear shelf (4-door)
Inside the trunk (4-door)
In the cargo area (5-door)
. When operating the push-button
ignition switch or starting the engine,
if the access key battery is discharged,
perform the procedure described in
Access key if access key does not
operate properly 9-18. In such a
case, replace the battery immediately.
Refer to Replacing battery of access
key 11-44.
Instruments and controls/Push button ignition switch (models with push button start system)

Switching power

1) Operation indicator
2) Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver s seat.
2. Shift the select lever into the P
position.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of
ACC , ON and OFF . When the engine
is stopped and the push-button ignition
switch is in ACC or ON , the operation
indicator on the push-button ignition
switch illuminates in orange.
Power
Indicator color
status
OFF Turned off
ACC Orange
Orange
(while engine is
stopped)
ON
Turned off
(while engine is
running)
CAUTION
. When the push-button ignition
switch is left in ON or ACC
for a long time, it may result in
vehicle battery discharge.
. Do not spill drinks or other
liquids on the push-button igni-
tion switch. It may cause a mal-
function.
OFF ,
. Do not touch the push-button
ignition switch with a hand soiled
with oil or other contaminants. It
may cause a malfunction.
. If the push-button ignition switch
3-7
Operation
Power is turned
off.
The following
systems can be
used:
audio and ac-
cessory power
outlet.
All electrical
systems can be
used.
CONTINUED