Using Foot Control - ELNA eXcellence 782 Instruction Book

(1)
(5)
3.
(3)
3.
1.
4.
(4)
(2)
2.
(7)
4.
(6)

Using Foot Control

If you wish to use the foot control, pull out the cord from
the foot control and insert the pin connector into the jack
on the machine.
1. First make sure the power switch is off.
2. Insert the machine plug of the power supply cable
into the machine socket.
3. Draw out the cord from the foot control and insert
the pin connector into the foot control jack on the
machine.
4. Insert the power supply plug into the wall outlet, and
turn the power switch on.
(1) Power switch
(2) Machine plug
(3) Machine socket
(4) Pin connector
(5) Foot control jack
(6) Power supply plug
(7) Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.
13