Tapering; Tapered Stitch Sample 1 - ELNA eXcellence 782 Instruction Book

(1)
(2)
(3)
(2)
(1)
(4)
(5)

Tapering

You can taper the beginning and end of the decorative
stitch patterns to create tapered corners and points.
Press the tapering key to enter the tapering mode.
(1) Tapering key
Press the stitch reference key to show the stitch
reference chart for tapering (refer to page 19).
(2) Stitch reference key
NOTE:
• The tapering length varies depending on the stitch
pattern and its tapering shape. Make a test stitch
on an extra piece of the fabric to check the tapering
length.
• If you stop the machine while sewing and change
the stitch width, needle drop position or stitch length,
the machine will start tapered sewing from the
beginning.

Tapered Stitch Sample 1

Example: To sew tapered stitch pattern #9
Select stitch pattern #9.
Start the machine. The machine sews the start tapering
pattern and pattern body.
Sew to the required length, then press the auto-lock
button. The machine sews the end tapering pattern and
stops.
(1) Auto-lock button
(2) Required length
(3) Start tapering pattern
(4) End tapering pattern
NOTE:
When you press the reverse button while sewing, the
machine will sew several locking stitches in place,
then stop sewing automatically. The tapering pattern
is not completed.
To sew the same sized tapered pattern
When finished sewing, a confirmation message will
appear. The number shown indicates the number of the
body patterns.
(5) Number of the body patterns
Press OK and simply start the machine to sew another
tapered pattern of the same size.
To sew the same tapered pattern in a different size, press
the X key.
90