Function Keys - ELNA eXcellence 782 Instruction Book

(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(11) (12) (13) (14)
(10)
(16) (17)
(1)
(15)
MONOGRAMMING
You can program letters and symbol designs for
monogramming.
Press the Monogram key and the font selection window
will open.
(1) Monogram key
You can select one of 8 fonts.
Select the desired font by pressing the corresponding
key.
(2) Block key
(3) Script key
(4) Broadway key
(5) Block (9 mm) key
(6) Cyrillic key
(7) Mincho (9 mm) key
(8) Marumoji (9 mm) key
(9) Symbol key
The monogram mode window will open.
NOTE:
The heights of Block (9 mm), Mincho (9 mm) and
Marumoji (9 mm) are approximately 9 mm.

Function Keys

(10) Cursor keys
Press the cursor keys to move the cursor up or down.
(11) Letter size key
Press this key to select the full size (L) or small size (S).
(12) Letter case key
Press this key to select upper case or lower case.
(13) Delete key
Press this key to delete selected characters.
(14) Preview key
Press this key to view the entire monogram.
(15) Save file key
Press this key to save the monogram as a data file.
(16) Hiragana/Katakana key*
Press this key to switch Hiragana or Katakana for
monograms.
(17) Horizontal/Vertical orientation key*
Press this key to switch the horizontal or vertical
orientation.
NOTE:
Numbers, symbols and European letters are available
on pages 2/5 through 5/5.
* These keys are displayed only when Mincho (9 mm)
or Marumoji (9 mm) is selected.
97