ELNA eXcellence 782 Instruction Book page 146

(7) Upper Thread Breakage Sensor
If you want to turn off the auto-stop function when the
upper thread (needle thread) breaks, turn off the upper
thread breakage sensor.
(8) Remaining Bobbin Thread
Set the time for notification when the remaining bobbin
thread is low.
The higher the number, the earlier, and the lower the
(7)
number, the later (when there is a large amount of
remaining bobbin thread).
To turn off the low bobbin thread warning, press the "–"
key until "OFF" shows in the window.
(8)
(9) Confirm to Delete Pattern Combination
When the combination mode is cancelled, a message will
appear before deleting patterns. When "OFF" is selected,
the confirmation message will not be displayed.
(9)
Press the next page key to show the next menu.
(10) Variable ZZ Sensitivity
You can adjust the amount of needle swing with the knee
lifter movement for variable zigzag in sewing applications.
Press the "+" key so the needle swings a small amount
when moving the knee lifter.
Press the "–" key so the needle swings a large amount
when moving the knee lifter.
(10)
(11) A.S.R. Sensitivity
You can adjust and save the A.S.R. sensitivity setting.
Press the "+" key to increase A.S.R. sensor sensitivity.
Example: Press the "+" key when the stitch length is not
(11)
stable or the sewing speed changes too slowly.
Press the "–" key to decrease A.S.R. sensor sensitivity.
Example: Press "–" key when the sewing speed is too
fast.
(12)
(12) A.S.R. Overspeed Warning Sound
The buzzer sounds when the fabric moves faster than the
value set by A.S.R. Sensitivity.
Press the "OFF" key to delete the buzzer sound.
Press the next page key to show the next menu.
144