Table of Contents
Advertisement
w
e
r
t
w Reverse button
When sewing stitch pattern 01, 04-07, 11-13, 01S,
04S-07S, (mode 1) or 38-39 (mode 2), the machine will
sew in reverse as long as the reverse button is pressed.
If stitch pattern 01, 04-07, 11-13, 01S, 04S-07S, (mode 1)
or 38-39 (mode 2) has been selected and the foot control
is not connected, the machine will start sewing in reverse
as long as the reverse button is pressed.
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
e Auto-lock button
When sewing stitch pattern 01, 04-07, 11-13, 01S,
04S-07S, (mode 1) or 38-39 (mode 2) the machine will
immediately sew locking stitches and automatically stop
when the auto-lock button is pressed.
When sewing all other patterns, the machine will sew to
the end of the current pattern, sew locking stitches and
stop automatically.
The machine will trim the threads automatically after
locking the stitch when the auto thread cutting is turned
on (refer to page 75).
r Needle up/down button
Press this button to bring the needle bar up or down.
The machine will stop with the needle in down position.
However, you can change the needle stop position in the
machine setting mode (refer to page 27).
t Thread cutter button
After finish sewing, press this button to trim the threads.
The needle bar automatically rises after trimming the
threads (refer to page 30).
NOTE:
Use the thread cutter on the face cover if the thread is
#30 or thicker (refer to page 30).
Controlling Sewing Speed
Speed control slider
You can limit the maximum sewing speed with the speed
control slider according to your sewing needs.
To increase the sewing speed, move the slider to the
right.
To decrease the sewing speed, move the slider to the left.
Foot Control
Pressing on the foot control can vary sewing speed.
The harder you press the foot control, the faster the
machine runs.
NOTE:
The machine runs at the maximum speed set by
the speed control slider when the foot control is fully
depressed.
Operating Instructions:
Foot control model YC-485EC is for use with this sewing
machine.
9
Advertisement
Table of Contents
