KTM 250 EXC-F 2013 Owner's Manual page 52

11 SERVICE WORK ON THE CHASSIS
–
Tighten screw
Guideline
Screw, top steering stem
101334-11
–
Tighten screws
Guideline
Screw, top triple clamp
–
Secure the wiring harness with cable holder
101333-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
101326-11
Finishing work
–
Install the front fender. (
–
Mount the handlebar cushion.
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Install the front wheel.
–
Check that the wiring harness, cables, and brake and clutch lines can move freely
and are routed correctly.
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
.
8
.
9
M8
.
bm
p. 54)
p. 89)
x ( p. 78)
M8 20 Nm
(14.8 lbf ft)
M8 20 Nm
(14.8 lbf ft)
.
bk
.
bl
25 Nm Loctite
(18.4 lbf ft)
p. 87)
p. 52)
p. 44)
50
® 243™
.
bn