Removing The Server From The Rack - Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual

CAUTION
▶
Do not use the extended server as a surface on which to put things
or as a work surface, and strictly avoid leaning on or against it.
4.4.3

Removing the server from the rack

In some cases, maintenance can be performed with the server
remaining in the rack (e.g. replacing hot-plug components). However,
depending on accessibility or security guidelines, it may make sense to
completely remove the server from the rack cabinet for maintenance
purposes.
CAUTION
▶
Use the anti-tilt plate to prevent the rack from tipping when
installing the rack. Removing the server out of the rack without
having installed the anti-tilt plate may cause the rack to tip over.
▶
Be careful not to pinch fingers or clothes when removing or
installing the server. Failure to do so may cause injury.
▶
For more information, see
CAUTION
At least two people are needed to lift the server out of the rack cabinet.
(For Japan, see " 安全上のご注意".)
GX2560 M7
"Important information" on page
Upgrade and Maintenance Manual
Basic hardware procedures
25.
41