Table of Contents
Advertisement
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Extending the server out of the rack" on page
▶
"Removing the server from the rack" on page
▶
"Removing the cover 2" on page
▶ Remove the riser module 4, see
Removing the LC tubes
In LC configurations the LC tubes must be removed to get access to the M.2
slots.
1
Figure 269: Disconnecting the LC tube from the cooling system
▶ Slide down the connection piece of the LC connector (1).
▶ Push the lash (2).
▶ Disconnect the LC tube from the cooling system (3).
▶ Disconnect all LC tubes in the same way.
GX2560 M7
38.
47.
"Removing the riser module" on page
Upgrade and Maintenance Manual
System board and components
38.
39.
39.
41.
62.
287
Advertisement
Table of Contents
