Expansion cards and riser modules
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Extending the server out of the rack" on page
▶
"Removing the server from the rack" on page
▶
"Removing top covers" on page
▶
"Removing the air duct" on page
▶ Remove the desired riser module, see
page
62.
Installing the expansion card
▶ If applicable, install a slot bracket to the expansion card, see
brackets" on page
Figure 104: Removing the slot cover
152
38.
45.
58.
140.
Upgrade and Maintenance Manual
38.
39.
39.
41.
"Removing the riser module" on
"Installing slot
GX2560 M7