Table of Contents
Advertisement
▶ Open the lock of the corresponding slot cover (1).
▶ Remove the slot cover (2).
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
Figure 105: Installing the expansion card in the riser module
▶ Carefully insert the expansion card into the selected PCIe slot and press
down firmly until it is fully seated in the slot (1).
▶ Close the lock (2).
GX2560 M7
Expansion cards and riser modules
Upgrade and Maintenance Manual
153
Advertisement
Table of Contents
