Table of Contents
Advertisement
Liquid cooling (LC)
▶ Fasten the four captive screws of the GPU LC heat sink in the sequence 1
to 4.
▶ Install all screws, but do not tighten them completely.
▶ Continue tightening each screw in the sequence to 1 in-lbf (Torx 15).
▶ Fully torque all screws to 3-4 in-lbf using the same alternating sequence.
▶ Proceed with the remaining three GPU LC heat sinks in the same way.
B
Figure 236: Position of lock and handles
▶ Install the GPU board carrier into the chassis using two handles (A).
258
Upgrade and Maintenance Manual
A
GX2560 M7
Advertisement
Table of Contents
