[Fax Settings]
Specify the settings for sending faxes.
* Values in bold red text are the default settings for each item.
* [Fax Settings] may not be displayed depending on the model, the installed options, and other settings.
[Change Default Settings](P. 486)
[Off-Hook Alarm](P. 486)
[ECM TX](P. 487)
[Set Pause Time](P. 487)
[Auto Redial](P. 487)
[Check Dial Tone Before Sending](P. 488)
[Set Line](P. 488)
[TX Start Speed](P. 488)
[R-Key Setting](P. 489)
[Change Default Settings]
[Menu]
[Function Settings]
Change the default settings for sending Faxes.
When you press
on the control panel while the fax sending screen is displayed, the settings revert to the values
specified here.
[Resolution]
[200 x 100 dpi
(Normal)]
[200 x 200 dpi (Fine)]
[200 x 200 dpi (Photo)]
[200 x 400 dpi (Superfine)]
[Density]
9 levels
[Sharpness]
7 levels
[Initialize]
[Off-Hook Alarm]
[Menu]
[Function Settings]
Adjust the volume of the alarm tone sounded when a telephone or the optional TELEPHONE 6 KIT is connected
and the receiver or handset is left off the hook.
●
Dragging the slider to the right increases the volume.
●
Dragging the slider to the far left mutes the sound.
4 levels
Settings Menu Items
[Send]
[Fax Settings]
Changing the Default Settings(P. 186)
[Send]
[Fax Settings]
486
[Archive TX Document](P. 489)
[Confirm Entered Fax Number](P. 489)
[Allow Fax Driver TX](P. 489)
[Use Address Book When On-Hook](P. 490)
[Restrict Sequential Broadcast](P. 490)
[Register Log Dest to Addr Book](P. 490)
[TX Terminal ID](P. 490)
[Auto Adjust VoIP Comm. Speed](P. 491)
8WFY-09W