Table of Contents
Advertisement
Cannot Print (Wireless LAN)
Troubleshoot by checking the items below.
Check the Wireless LAN Connection Status.
Check the connection status of the machine, and take action according to the status.
Address and Connection Information of the Wireless LAN(P. 95)
If the Machine Is Not Connected to the Wireless LAN
Check the status of the computer and wireless LAN router (access point) and the status of the machine, and
reconnect to the wireless LAN.
If the Connection Is Poor
Change the following settings on the wireless LAN router, and try printing:
●
Change the channel of the wireless LAN router. If there are multiple wireless LAN routers, separate the
channels by five or more channels.
●
Increase the wireless output of the wireless LAN router if possible.
Are the Machine and Computer Connected to the Same Wireless LAN Router?
●
When you are using a computer connected to a wireless LAN, check that the SSID (identifier of the wireless
LAN router) of the machine matches that of the computer.
Viewing the MAC Address and Connection Information of the Wireless LAN(P. 95)
Viewing the Network Connection Information of the Computer(P. 657)
●
If the SSID of the machine and the computer do not match, configure the wireless LAN connection settings
on the machine again, and connect the machine to the SSID to which the computer is connected.
Connecting to a Wireless LAN(P. 57)
Is the Printer Port of the Computer Configured Correctly? (Windows)
Change the settings if they have not been configured correctly. If there is no available port, add a new port.
Viewing the Printer Port(P. 659)
Configuring a Printer Port (Windows)(P. 199)
Can You Access Remote UI?
If you cannot access Remote UI, the firewall settings of the machine may be incorrect, preventing
communication with the computer.
Use the following procedure to disable the firewall settings with the control panel, and then use Remote UI to
configure the firewall again.
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model
1
Disable the firewall settings.
To Disable IPv4 Address Filter
[Home] screen on the control panel
Address Filter]
To Disable IPv6 Address Filter
[Home] screen on the control panel
Address Filter]
Troubleshooting
Cannot Connect to Wireless LAN(P. 583)
[Menu]
[Outbound Filter] or [Inbound Filter]
[Menu]
[Outbound Filter] or [Inbound Filter]
[Preferences]
[Network]
[Off]
Restart the machine.
[Preferences]
[Network]
[Off]
Restart the machine.
593
8WFY-0EE
Viewing the MAC
[Firewall Settings]
[IPv4
[Firewall Settings]
[IPv6
Advertisement
Table of Contents
