Table of Contents
Advertisement
Disabling HTTP Communication
It is recommended to disable HTTP communication when using only the USB connection or when not using functions
that require HTTP communication, such as Remote UI, WSD printing, and AirPrint.
This section describes how to configure the settings using the control panel.
You can also configure the settings using Remote UI from a computer.
(Remote UI)(P. 392)
Administrator privileges are required.
Touch Panel Model(P. 388)
5 Lines LCD Model(P. 388)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen.
2
Press [Preferences]
➠
The [Use HTTP] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then click [Log In].
the Machine(P. 133)
3
Press [Off]
5 Lines LCD Model
1
Press
on the control panel.
2
Press [Preferences]
HTTP]
➠
The [Use HTTP] screen is displayed.
If the login screen appears, enter the currently set System Manager ID and PIN, then select [<Log In>] and
press
.
Logging In to the Machine(P. 133)
3
Select [Off] and press
4
Select [Yes] and press
[Network]
[Yes].
[Network]
.
.
.
Security
Managing the Machine from a Computer
[TCP/IP Settings]
Control Panel(P. 14)
[TCP/IP Settings]
388
[Home] Screen(P. 116)
[Use HTTP].
Logging In to
8WFY-081
[Use
Advertisement
Table of Contents
