Table of Contents
Advertisement
Changing the Report and List Print Settings
Reports and lists are printed on paper on one side by default. You can change the setting to print on both sides. You
can also change the setting to automatically print communication results reports.
*1
For the 5 Lines LCD Model, the reports of communication results are not available.
Use the control panel to configure the settings. You cannot configure the settings using Remote UI from a computer.
Touch Panel Model(P. 405)
5 Lines LCD Model(P. 406)
Touch Panel Model
1
On the control panel, press [Menu] in the [Home] screen.
2
Press [Output Rprt.]
➠
The [Report Settings] screen is displayed.
3
Change the report and list print settings.
To Print Reports and Lists on Both Sides
1
Press [Default Settings for Report Output]
➠
The [2-Sided Printing] screen is displayed.
2
Press [On].
To Change the Communication Management Report Settings
1
Press [Communication Management Report].
➠
The [Comm. Mngt. Report] screen is displayed.
2
Configure the report settings.
●
To print automatically after every 40 communication events, press [Auto Print (40 Transmissions)]
[On].
●
To configure the settings to print sending and saving results and receiving results in a different
format, press [Separate TX/RX]
To Change the Fax TX Result Report Settings
1
Press [Fax TX Result Report].
➠
The [Fax TX Result Report] screen is displayed.
Managing the Machine
[Report Settings].
[2-Sided Printing].
[On].
405
*1
[Home] Screen(P. 116)
8WFY-08F
Advertisement
Table of Contents
