Cannot Print (Wired Lan) - Canon MF264dw II User Manual

Cannot Print (Wired LAN)

Troubleshoot by checking the items below.
Is the Printer Port of the Computer Configured Correctly? (Windows)
Change the settings if they have not been configured correctly. If there is no available port, add a new port.
Viewing the Printer Port(P. 659)
Configuring a Printer Port (Windows)(P. 199)
Can You Access Remote UI?
If you cannot access Remote UI, the firewall settings of the machine may be incorrect, preventing
communication with the computer.
Use the following procedure to disable the firewall settings with the control panel, and then use Remote UI to
configure the firewall again.
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model
1
Disable the firewall settings.
To Disable IPv4 Address Filter
[Home] screen on the control panel
Address Filter]
To Disable IPv6 Address Filter
[Home] screen on the control panel
Address Filter]
To Disable MAC Address Filter
[Home] screen on the control panel
Address Filter]
2
Configure the firewall correctly.
5 Lines LCD Model
1
Disable the firewall settings.
To Disable IPv4 Address Filter
on the control panel
Settings]
[Off]
To Disable IPv6 Address Filter
Troubleshooting
[Menu]
[Outbound Filter] or [Inbound Filter]
[Menu]
[Outbound Filter] or [Inbound Filter]
[Menu]
[Outbound Filter] or [Inbound Filter]
Setting the Firewall(P. 348)
[Preferences]
[IPv4 Address Filter]
Restart the machine.
[Preferences] [Network]
[Off] Restart the machine.
[Preferences] [Network]
[Off] Restart the machine.
[Preferences] [Network]
[Off] Restart the machine.
[Network]
[Outbound Filter] or [Inbound Filter]
595
8WFY-0EF
[Firewall Settings] [IPv4
[Firewall Settings] [IPv6
[Firewall Settings] [MAC
[Firewall