Rider's Heated Seat Switch (If Fitted); Brake And Clutch Lever Adjusters - Triumph Tiger 1200 GT 2021 Owner's Handbook Manual

GENERAL INFORMATION
60
A lighting on/off switch is not fitted to
this model. The rear light and licence
plate light all function automatically
when the ignition is turned on. The
headlight will function when the ignition
is turned on and the engine is running.
Models without Daytime Running Lights
(DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
A lighting on/off switch is not fitted
to this model. The position light, rear
light and licence plate light all function
automatically
turned on. The headlight will function
when the ignition is turned on and the
engine is running.
Rider's Heated Seat Switch
(if fitted)
The rider's heated seat will only heat
when the engine is running. When the
rider's heated seat is switched on, then
the rider's heated seat symbol will
appear in the display. The selected heat
level will also be indicated by the colour
of the symbol. For more information, see
page 87.
when the ignition
Brake and Clutch Lever
Adjusters
Do not attempt to adjust the levers
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic
to gain familiarity with the new lever
setting.
Do not loan your motorcycle to anyone
as they may change the lever setting
is
from the one you are familiar with
causing loss of motorcycle control and
an accident.
A span adjuster is fitted to both the
front brake and clutch levers. The
adjusters allow the distance from the
handlebar to the levers to be changed
to suit the span of the operator's hands.
Span Adjuster
1. Span adjuster (brake lever shown)
Warning
1