Steering Lock; Right Handlebar Switches; Hazard Warning Lights Button; Power On/Off Position - Triumph Scrambler 1200 XC Owner's Handbook Manual

General Information

Steering Lock

Warning
Always disengage the steering lock
before riding.
If the steering lock is engaged, it is
not possible to turn the handlebars or
steer the motorcycle.
Riding without motorcycle steering
control will lead to loss of motorcycle
control and an accident.
The steering lock is located on the
upper yoke.
It is a two position, key operated lock.
The key can be removed in either the
engaged or disengaged positions.
To engage the steering lock:
• Insert the key and turn clockwise.
• At the same
handlebar fully left until the lock
engages.
To disengage the steering lock:
• Insert the key.
• Turn the handlebar slightly to relieve
any weight on the steering lock, and
turn the key counter-clockwise.
To remove the key:
• Rotate the key clockwise slightly to
disengage the retaining mechanism
before it can be removed from the
lock.
66
time, turn the

Right Handlebar Switches

1
3
4
5
6
7
1. Hazard warning lights switch
2. Engine start/stop switch
3.

Power ON/OFF position

4. STOP position
5. RUN position
6. QUICK START position
7. HOME button

Hazard Warning Lights Button

To turn the hazard warning lights on
or off, press and release the hazard
warning light button.
The ignition must be switched on for the
hazard warnings lights to be activated,
but the hazard lights will remain active
if the ignition is switched off until the
hazard warning light button is pressed
again.
Power ON/OFF Position
The Power ON/OFF position switches
the electrical
instrument display between on or off.
This allows access to the instrument
display without starting the engine.
2
circuits and the