Table of Contents
Advertisement
Event Logs
The UPS will record the 20 most recent system events (faults) in the Event Logs.
1 . Press the "ENTER" button to enter the "Main Menu" layer.
2 . Press the "UP" and "DOWN" buttons to scroll to the "Main Menu" items.
3 . Press "ENTER" button to enter the "EVENT LOGS".
Event Displayed
F## ----/--/--
Event Content
4 . Press the "UP" and "DOWN" buttons to scroll through the "Event Logs". The UPS will
record events listed in the table below.
5 . If you want to clear the present Event logs data, press the "UP" and "DOWN" buttons to
scroll to the "Clear Event Logs" Option then press the "Enter" button.
6 . You may be prompted "Activate?" to act the selection, if so press the "ENTER" button to
act the Clear Event Logs function.
7 . Press the "ESC" button to return to the Main Menu.
Event Logs Cont.
Event
Event Content
Code
01
Over Charge
02
Charger Failure
04
Battery Low
05
Battery Failure
Battery
06
Disconnected
07
Service Battery
12
Load Over Set%
21
Output Short
22
Output Overload
25
EPO Off
USING THE UPS SYSTEM
Event date and time followed by event description.
LCD Display
01 Over Charge
02 Chgr Failure
04 Battery Low
05 Batt Failure
06 Batt Missing
07 Service Batt
12 Load Ovr Set%
21 Output Short
22 O/P Overload
25 EPO Off
32
Description
Description
The Battery has been charged too High
voltage.
The Battery Charger has malfunctioned.
The Battery has been discharged to low
level.
The UPS has detected battery failure.
The UPS has not detected batteries.
The Battery Replacement Date has
reached the maintenance period.
The UPS has detected Output Watt or VA
has exceeded user set parameter.
The UPS has detected output short.
The UPS has detected Output Watt or VA
are too High.
The UPS has been turned off by EPO.
Advertisement
Table of Contents
