IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or operate the UPS. CAUTION! The UPS must be connected to a grounded AC power CAUTION! Wiring must be done by qualified personnel.
UNPACKING User’s manual Register card Phone line USB communication cable Serial Interface Cable (RS-232) 1K/1.5KVA or 2K/3KVA UPS PowerPanel® Business Edition software CD SAFETY PRECAUTIONS CAUTION! Installation environment should be in a temperature and humidity controlled indoor area free of conductive contaminants. Do not install this UPS where excessive moisture or heat is present (Please see specifications for acceptable temperature and humidity range).
INSTALLING YOUR UPS SYSTEM SYSTEM BLOCK DIAGRAM Bypass Input Inverter Output Input Output Filter AC/DC DC/AC Filter LCD Module Charger Control Battery DC/DC AC/DC & USB & DB9 Monitoring SNMP Slot Line Mode Battery Mode Bypass Mode HARDWARE INSTALLATION GUIDE Battery charge loss may occur during shipping and storage.
12. Extended Runtime Battery Module Connector reserves are transferred to specified outlets during a power outage. The Connection for additional CyberPower XL Battery modules. unit can be programmed to provide additional runtime for equipment connected to the “CRITICAL” outlets, while stopping the power supply to 13.
OPERATION INSTRUCTIONS FOR LCD MODULE LED INDICATORS – UPS STATUS LED Indicators Color UPS Status Description ON/OFF White UPS power is on. ON-LINE Green UPS is operating in Line Mode. BATTERY ON Yellow UPS is operating in Battery Mode. BYPASS Yellow UPS is operating in Bypass Mode, Manual Bypass or ECO (Economy) Mode.
OPERATION INSTRUCTIONS FOR LCD MODULE MULTI-FUNCTION LCD MAIN MENU Press “Enter” button to activate “MAIN MENU”. MAIN MENU submenu Function Description Information Displays the UPS information. Configure Displays the UPS settings that can be configured by the user. Displays most recent events, event...
OPERATION INSTRUCTIONS FOR LCD MODULE LCD EVENT LOG 5 Event Logs of UPS can be recorded. Press the “ENTER” button to activate the “MAIN MENU”. Press the “▲” and “▼” buttons to scroll to the “Event Log” option. Press the “ENTER” button to select the “Event Log” submenu. Press the “▲”...
OPERATION INSTRUCTIONS FOR LCD MODULE SILENCING AUDIBLE ALARMS Press any of four function buttons on the LCD module; Note: the alarm can not be turned off for a “Battery Low” condition. This condition will still result in an audible alarm. Change the 'Audible Alarms' option to 'Disable' in the LCD screen and it will no long give an audible alarm for any malfunction.
MAINTENANCE CAUTION! To avoid electric shock, turn off and unplug the UPS from Storage the wall receptacle before servicing the battery. To store your UPS for an extended period, cover it and store with the CAUTION! Only use tools with insulated handles. Do not lay tools or battery fully charged.
Charger Failure Charger has failed. 2. Contact CyberPower for repair. High O/P V Output voltage is too high. Low O/P V Output voltage is too low. 1. Shut down UPS and turn off input breaker.