Table of Contents
Advertisement
UPS Modes of Operation and Topology:
UPS MODE/
STATUS (ICON)
UPS is operating in Line Mode.
The UPS is operating and protecting
the equipment normally.
UPS is operating in Battery Mode.
A utility power failure has occurred.
The UPS is using battery power to
work and protect the equipment.
UPS is operating in ECO (Economy)
Mode. If Bypass quality is within the
ECO mode setting specifications,
the UPS will operate in Bypass until
input power is disqualified per set
specifications. At that time the UPS
will automatically switch to Line
Mode.
UPS is operating in Bypass Mode. A
Warning or Fault has been detected
and the UPS transfers output to
utility power.
Provides the flexibility to set the
output frequency, regardless of
the input frequency, to match
connected equipment by selecting
50Hz or 60Hz output on the LCD
control panel.
Converter Mode
The audible alarm is disabled.
A Fault has been detected and
the UPS transfers output to utility
power.
USING THE UPS SYSTEM
MODE/STATUS DESCRIPTION
UPS TOPOLOGY: MODE DISPLAY
23
N/A
N/A
Advertisement
Table of Contents
