Table of Contents
Advertisement
MAINTENANCE
Please read and follow the Safety Instructions before servicing the battery. Battery
replacement should be performed by trained personnel who are familiar with the procedures
and safety precautions. Make a note of the Replacement Battery part number.
• NOTE: Before replace battery packs, please make sure that the form factor of the UPS is
installed as rack type.
Step 1: Remove the Front Panel of Battery Module
Loosen the screw on right side of the 1U panel to open the plastic front panel.
Step 2: Disconnect the Battery Connectors
Step 3: Loosen Eight Screws to Remove the Battery Compartment Covers
Step 4: Pull Out the Battery Packs
Pull the battery packs out slowly on to a flat and stable surface. Set them aside for reinstalling
after that the UPS is rack mounted.
1
2
3
4
*Use OLS6/10KERT5U as reference.
37
Advertisement
Table of Contents
