Table of Contents
Advertisement
Setting Item &
LCD Display
Low Capacity Warning
C28 Low CA. Warn
Wiring Alarm
C31 Wiring Alarm
Back to Default Setting
C32 Default Set
USING THE UPS SYSTEM
Available Settings
(* = default setting)
[10%], [15%], [20%]*, [25%],
[30%], [35%], [40%], [45%],
[50%], [55%], [60%], [65%]
[Disable]*, [Enable]
[Activate?]
Alert when the UPS supplies battery
power and the remaining capacity is
lower than this threshold.
Sets [Disable] or [Enable] the auto-
checking of Input wiring fault.
Allows the user to restore the UPS
factory default settings.
NOTE: This set up item is only available
when UPS in standby mode.
30
Description
Advertisement
Table of Contents
