Yamaha SR250G Service Manual page 62

4, Soax chain in sclvemt, brushing off re
maining dir. Dry wich high pressure air
Lubricate thoroughly to make sure
lubricant penetretes, Wipe off excess.
Reinstall
FRONT FORKS
mbly
1. With the front wheel and front orake
cable removed, the fork legs can be re.
moved from the upper and ower
brackets by loosening upper and lower
pinch bolts
NOTE: — —————_____.
Belure loosening the upper and lower pinch
bolts, remove the front fork cap halts.
2, Remove the caps anc drain the oil from
both fork tubes
Remove the special bolt from botzom ot
outer tubes.
Remove inner tube
assembly from outer tube
Pull out damper assembly. Inspect and
replace if damaged.
and damper
To replace the fork seal. remove the
dust seal and snap-ring from outer
tube.
Cerefully pry out old seal without
damaging fork tube
Insert new seal "open" side down using
large socket and stee! hammer.