Table of Contents
Advertisement
Crankcase
+.
Working in @ crisscross pettern, loose7
all bolts 1/4 turn each,
Remove
them
after all area loosened
Remove the right crankcase by pulling it
nv
up
For this removal, slits in the crankcas=
can be used as snown in the phote
Transmission
Remove the transmission shaft, shift forks
and shift cam. Tap light'y on the transmission
drive shaft with a soft hammer
to remove.
NOTE
Femove assembly czrefully. Note the posi-
tion of each part. Pay particular attention to
the locstion snd direction of shift forxs,
NOTE:
While removing the drive axle from the
prankvase, pay careful attention to the oil
seal lip, A recommenced practice is 10 fit the
(Q" ring and to spoly grouse over the fitted
area,
© rms
Crankshaft
Remove
crankshaft assembly
with the
crankcase separation tool (Special tool).
Advertisement
Table of Contents
