Table of Contents
Advertisement
Fuel Level
NOTE:
Before checking the fuol level. note the fok
lowing:
1. Place the motorcycle on a level surface
2. Adjust the motorcycle position oy plac
ing a suitable stand or 2 garege jack
under the engine so that the carburetcr
is positionod versically
1. Connect the level gauue (special too!) or
a vinyl pipe of 6 mm (0.24 in) in inside
din to the float bowl nozzle.
3. Start the engine and stop it after a few
minutes of run. This procedure is
sary to obtain the correct fusl
level
4. The fuel leve! should ba in the specified
range.
Specified rangs
|
2104 mm (0.079 ~ 0.148)
|
below the carb body ede:
2 Sufecotenmse
B=
20 mmiO0Ein)
5. If the fuel level is incorrect. remove the
carburetor from the motorcycle and
check the fuel valve and ficat assembly
Tor damage. Replace if damaged.
6. If ne demage is found, correct the fuel
level by slightly bending the flnat arm
tang. Recheck tha fuol level
Advertisement
Table of Contents
