Table of Contents
Advertisement
Quantity pe leg
16800
(5.70
§ After filling slowly pump the 'orks up
and down to distribute the oil
© Inspect the "O" "ing on the spring seat.
Replace °Q" ring if damaged
10 Reinstall the spring seat. stopper ring
and rubber cap.
Suspension, Steering and Swing Arm
1) Stearing head adjustment
Block the motorcycle up so tat front
wheel is off the ground
© Grnap the bottam af the forks and gan
tly rock fers assembly
veckward
and
forward, checking for any looseness in
the steering
assembly bearing.
© , If the steering head neecs edjustment
remove he handiehar cover and looser
the
stearing fitting bolt.
J. Using Wie tine nut wrench, adjust the
steering ring rut urti steering head is
tight without binding when te forks are
turned
Note; —————_________
Excessive tightening of this 7ut will cause
Favid weat of the ball bearings anc races.
Re-chenx for
and. freedam of
movement
onseness
¥. Tiylitvn
the steering fitting bolt
NOTE
After completing tie steering adjustment
make certain forks >ivot trem stap to stop
without nindirg, IF binding io noticed, repeat
adjustment.
?
ension
a. Cleck the all suspension components
fer prozer operation
hh Cneck the all suspension fittings for
proper Lv atness.
3 Swing arm
a. Crock fer fraedom of up snd down
movement
b Crecksice to side freeplay
Swing
aim free play
1.0 mm [0 04 in) at end of swing arm
c. Check the all secunng belts tor proper
tightness
Advertisement
Table of Contents
