Yamaha SR250G Service Manual page 25

6 Flywheel magnato ramoval
ove the flywheal securing nut using
tor halding teal
2. Fry! pul
1 . ower ekg Yost
b. Install the flywheel puller on the fiy-
whee ang tighten it
NOTE
The puller body has leftrend threud
6 While holding tne puller body. tighten
the push belt, This will pull tue fly-
wheel off she tarersd end of the crank
shaft
d. Remeve the megreto base assembly
with the lead wire
NOTE:
1, Pey careful attention to the "O-nag
fitted along the outer circle af the mag
neto base because this rng is made cf
silicon) 'ubbsr and is susceptible to
damage
2. If tho magnato base is difficult to re
move, screw Dolts (NB) into the holes
indicated by an arrow to pull our tho
base with
7. Loosen the guide stopper locking aut
and bolt
8 Remove the cam cnain and cam chain
sprocket
9. Remove the six cylinder head -wtaining
bolss (2 af which are internal hexagon
belts) and the cylinder retaining bolt
NOTE: ———
Loosen the bolts in the order indicated in the
following pheto