Table of Contents
Advertisement
Erasing Index Signals
To remove any unwanted index signals, follow these steps:
1 Press INDEX once during playback or stop mode.
When the data screen is on the TV screen, "INDEX SCAN STANDBY' appears.
3 Press INDEX ERASE during 10 second preview.
"INDEX ERASE' is displayed on the TV screen. The tape automatically rewinds to
a position before that index, then the index is erased. During erasing, a black
streak appears at the bottom of the screen. After erasing is complete, the next
index is located.
INDEX.
ERASE
Notes
« At the beginning of the tape,
you cannot erase an index
signal.
Index recorded in
the prerecorded 8mm
cassettes cannot be erased.
Some index signals marked
on other camcorders or VCRs
cannot be erased on this unit.
Also. it may not be possible to
erase index signals marked
on this unit on other
camcorders or VCRs.
It is recommended to erase
index signals on the same
equipment on which the index
signals were marked in order
to perform index erasing
correctly
52
Index Function
Advertisement
Table of Contents
