Table of Contents
Advertisement
Never unplug the power cord
while a tape is moving
This may cause the tape to be
jammed in the VCR. When you
need to unplug the power cord,
be sure to remove the cassette
or turn off the power of the VCR.
Playing Back a Cassette
The VCR automatically detects the type of video system in which the tape was
recorded (Hi8 or standard video system, for details see page 54) and plays back
the tape accordingly. When a tape recorded in Hi8 video system is played back,
the Hi8 indicator on the VCR lights up.
1 Insert a cassette.
The VCR turns on automatically.
2 Turn on the TV.
if your TV is connected to both the VHF/UHF OUT and MONITOR OUT (or LINE
OUT) on the VCR, select the input for the VCR.
If your TV is connected only to the VHF/UHF OUT on the VCR, select the channel
for the VCR (Ch 3 or Ch 4).
3 Press > PLAY.
To stop playback
Press M STOP.
To stop playback for a moment
Press If PAUSE.
Press If PAUSE again or press [> PLAY to resume playback.
To advance the tape rapidly
Press &@ STOP, then >> FF.
To rewind the tape
Press ™ STOP, then <4 REW.
To view the picture during fast forward mode or rewind mode
You can view the picture momentarily while the VCR is in the fast forward or rewind
mode.
Keep pressing >> during fast forward, and keep pressing <4 during rewind. Release
the button to return to fast forward or rewind.
To eject the cassette
Press
& EJECT on the VCR.
Pressing
@ EJECT when the VCR is turned off will turn the unit on, eject the cassette
and then turn it off again.
When the tape reaches the end during playback
The VCR automatically rewinds the tape to the beginning and the power remains on.
To turn the VCR on or off
Press POWER.
Playback
3 1
Advertisement
Table of Contents
