Table of Contents
Advertisement
VCR Setup (Simple Cable)
1 Set the RF UNIT on the VCR's rear panel to 3 CH or
4 CH.
If you made A/V connections, skip this adjustment.
3cHL
4CHT
Set to whichever channel is not used in your area.
| If both are used, pick either channel.
Details are on page 80.
2 Set NORMAL/CATV to CATV.
co
ae
Select TUNER PRESET.
Press MENU.
Details are on page 25.
3 Preprogram the channels into the VCR.
Press MENU.
Select TUNER PRESET.
TUNER PRESET
CH 1
P NOAMAL CATY NomMecaTY
'SET UP MENU
'AUTO PRESET
ReruReanaust
WORCATSET ;A00 erase
TUNER PRESET
-_>
sas
OM
Use & ¥ to melect an
Use & ¥ tosaiectan
item, then push EXECUTE
ftom then push EXECUTE
Select AUTO PRESET,
!
then press EXECUTE.
wenu
> AUTO MENU
|
i
TUNER PRESET
cH
:
WORMSCATY
i
MANUALSET
ADD ERASE
FINE TUNING
To stat AUTO PRESET.
push EXECUTE
| Details are on page 25.
Clock Setting
1 Open the cover of the Remote Commander.
2 Press CLOCK SET.
3 Press DAY to set the date, month and year.
4 Press H (hour) and M (minute) under the TURN
OFF section to set the hour and minute.
———=a
TRANSMIT ==
5 Transmit the setting to the VCR with TRANS, and
close the cover.
Details are on page 24.
To Watch TV
1 Turn your VCR off, or press VCR's TV/VTR button
until the VTR indicator in the display window goes off.
2 Select the channel with your cable box (if you have
one), or directly tune with your TV (if you don't).
To Watch the VCR
1a If you didn't use the A/V input:
« Turn on the cable box.
* Select Ch 3 or 4 on the cable box (whichever you
set on the back of the VCR).
* Select the output channel of the cable box (usually
2, 3 or 4) on your TV.
1b If you made the A/V connections on page 13:
Set your TV to the A/V input.
2 Insert a cassette and press > PLAY.
Details are on pages 31.
To Record a Program Using the Timer
1 insert a cassette.
2 Open the cover of the Remote Commander.
3 Press DAY, TURN ON, TURN OFF and CH to set
date, start time, end time and channel number.
4 Transmit your programmed timer data with TRANS.
Details are on pages 37 and 38.
Hookups and Getting Started | 17
Advertisement
Table of Contents
