Table of Contents
Advertisement
38
Timer-Activated Recording
6 Set the recording speed, SP or LP, with
TAPE SPEED (SP/LP).
7 Press CH (CHANNEL) until 26 appears.
{If you wish to record a cable TV program,
display CATV in the LCD panel with
Th
NORM/CATYV, then select the desired
channel.)
The "TRANSMIT" indicator blinks to
indicate that all of the items are entered.
\" at v|
—"SITRANSMIT =
2
LP
PM
ON 17} 77.07) OFF
o
Disetils
wm
wa
8 Point the Remote Commander to the VCR
\'r" i vr |
agg TRANSMIT fa
and press TRANS. Press TRANS within
Fr
a
ae ¥, hn
five minutes after you have entered all the
VON g Mermore
ire 5
is
items.
hyo
Jessy
sue
a a
A beep sound will tell you that the preset
data have been transmitted to the VCR,
and the VCR enters recording standby
mode. The TIMER REC indicator lights up
in the display window of the VCR.
To set another program, repeat steps 2 to
8.
9 Close the cover of the Remote
Commander so that the present time
appears on the LCD panel.
The VCR turns on automatically and
starts recording at the preset time, then
turns off after the recording ends.
To stop timer-recording
To stop timer-recording while a program is being recorded, press TIMER REC (ON/
OFF).
To record video sources from LINE IN 1 or 2 jacks
Press INPUT SELECT in step 7 to change the input indication in the LCD panel from
CHANNEL to L1 or L2. Select LINE 1 or LINE 2 according to the input jack used.
Advertisement
Table of Contents
