Sony Hi8 EV-S3000 Operating Instructions Manual page 69

Connecting Video Equipment with the
CONTROL S connector
You can use this connection only on the rear panel.
You cannot control another VCR from this VCR, using this connection.
This VCR (Player)
as
MONITOR OU
© LINE OUT
¥ VIDEO (Yellow)
AUDIO L (White)
AUDIO R (Red)
A
Ie
CONTROL-S|
IN
VIDEO IN (Yellow)
AUDIO L IN (White)
AUDIO R IN (Red)
Supplied audio/video cable ——\.
CONTROL-S cable (not supplied) = _»_,
CONTROL-S OUT
cs 'Signal flow
When using the CONTROL S cable
Set the commander mode of this VCR and another video equipment to the same
position.
If another video equipment has the synchronized function, use the SYNCHRO
EDIT button on another equipment.
Comparing to the synchronized editing using the LANC connector, the
synchronized editing using the CONTROL S connector only enables you to pause
both VCRs and release the pause mode of both VCRs.
Synchronized Editing 69