Table of Contents
Advertisement
Attaching the External
Antenna Connector
(supplied)
Attaching the EAC66 U/V
Band Separator/Mixer
(not supplied)
3000hm twin
lead cable
screws
VHE/UHF-IN
aon on twin lead
75-0hM coaxial Cable re
1 Loosen the screws on the antenna connector.
2 Fit the 300-ohm twin lead cable on the UHF
antenna under the screws on the antenna
connector.
3 Retighten the screws.
82
General Setup information
1 Loosen the screws on the U/V band separator/
mixer.
2 Fit the 300-ohm twin lead cable on the UHF
antenna under the screws.
3 Connect the 75-ohm coaxial cable to the U/V band
separator/mixer.
4 Connect the U/V band separator/mixer to the VHF/
UHF IN plug on the VCR.
Advertisement
Table of Contents
