Table of Contents
Advertisement
Notes
If the tracking bar is shifted
too much, noise in the picture
becomes too unstable to
adjust. In this case, reset the
tracking to the center
position.
If you adjust the tracking bar
during reverse slow motion
playback, the picture may
shake or the color may not
be reproduced properly or
the color may disappear from
the screen.
46
Variable Speed Playback
Slow Motion Playback
This feature works only when using the Remote Commander.
Press B> SLOW 1/10 (1/10 of normal speed) or 1/5 (1/5 of normal speed) during
playback.
To play back in slow motion in the reverse direction
Press <.
To resume the forward direction
Press >.
To return to normal playback
Press ® PLAY.
If you leave the VCR in slow motion mode for more than one minute, the VCR will
automatically return to normal playback to protect the tape against damage.
If snow or streaks appear during slow motion playback
Adjust the picture on the PICTURE ADJUST menu.
This adjustment works only during slow motion playback.
Press MENU to call up the main MENU.
Press A or ¥ to move the cursor to PICTURE ADJUST.
3 Press EXECUTE.
The PICTURE ADJUST menu appears.
Press A or ¥ to move the cursor (>) to SLOW TRACKING.
Press < or ® to move the M mark on the tracking bar so that
the picture
will be shown on the screen more clearly.
Press EXECUTE.
The PICTURE ADJUST menu disappears.
Current tracking
position
Tracking bar
Advertisement
Table of Contents
