Table of Contents
Advertisement
Assemble Editing
Before you begin
¢
Select the tape speed (SP or LP) with the TAPE SPEED button.
¢
Press the INPUT SELECT button to select LINE IN 1 or LINE IN 2.
(When connected to the rear panel, select LINE IN 1. When connected to the front
panel, select LINE IN 2.)
L1 or L2 appears in the display window of the VCR.
*
Adjust the REC LEVEL control so that the red index mark stays at position 5.
Player's tape
Cut out
Cut out
Recorder's tape
Operation
1 Insert a recorded cassette into another VCR and a cassette for recording into this
VCR.
2 Record on this VCR while viewing the playback picture of another VCR and have
the VCR enter recording pause mode at the point (point @) ) where you want to
cut out.
(point (6) ).
4 Repeat steps 2 and 3 to make a newly composed tape.
Assemble Editing/Insert Editing
65
Advertisement
Table of Contents
