OPERATING BASICS
SWITCHING POWER ON/OFF
ADJUSTING SQUELCH
Press the POWER switch to turn the transceiver ON or
The purpose of the Squelch function is to silence
OFF.
background noise output from the speaker (squelch closed)
when no signals are present. When the squelch level is set
correctly, you will hear sound (squelch opened) only while a
station is actually being received.
1
Press [F], [MONI].
«
The current squelch level appears. The default is level 1.
ADJUSTING VOLUME
Press and hold [MONI], then turn the VOL control
clockwise to increase the audio level or counterclockwise to
decrease the audio level.
er
eee
ey
Pee
:
* If "BUSY' is visible, you need not press and hold [MONI].
BH
eee gee
ae Soe tee ay
e a t uk ales
m
e
Selecting level 0 allows you to hear weak signals,
however, background noise is always audible.
e
Selecting level 2 allows you to hear only strong signals.
Note:
To hear a weak signal or background noise, deactivate the
Squeich function by pressing [MONI].
3 Press any key other than [MONI] and [D] to complete
setting.