Automatic Power Off (Apo); Lamp Function . 0.0; Beep On/Off; Scene Sceticceitesvpoeseeeeereenenie - Kenwood TH-235A Instruction Manual

AUTOMATIC POWER OFF (APO)
Automatic Power Off is a background function that monitors
whether any keys have been pressed, or whether the
Tuning control has been turned. After 1 hour passes with
no operations, APO turns OFF the power. However,
1 minute before the power turns OFF, "APO" appears and
blinks, and a series of warning tones sound.
Access Menu No. 2 to toggle the function ON or OFF
(default).
Note: /f the squelch opens or any settings are changed during the
1 hour period while APO is ON, the timer resets. When the squeich
closes or you stop changing the settings, the timer begins counting again
from 0.
BATTERY SAVER
Battery Saver becomes active when the squelch is closed
and no key is pressed for more than 10 seconds. This
function becomes passive whenever the squelch is opened
or any key is pressed.
Access Menu No. 1 to toggle the function ON (default) or
OFF.
LAMP FUNCTION
You can illuminate the transceiver display by pressing [D].
Approximately 5 seconds after releasing [D], the light goes
OFF if no other key is pressed. Pressing any key other
than [D] while the display is lit restarts the 5 second timer;
pressing [D] turns OFF the light immediately.
To latch the light ON, press [F], [D]. The display remains Iit
until you press [F], [D] again.
BEEP ON/OFF
The transceiver beeps each time you press a key on the
keypad. You can also switch this function OFF.
Access Menu No. 4 to toggle the function ON (defauit) or
OFF.